Fully Insured
£5 million insurance cover, with documentation supplied on request.
Wilmslow · Cheshire · SK9
Render cleaning in Wilmslow
Rendered elevations are one of the services we are asked for most often in Wilmslow, and every one of them is soft washed at low pressure rather than blasted.
From Fulshaw Park to Styal, Wilmslow properties mix render, stone and very large driveways — usually all needing attention at once.
from £320
Render cleaning on Wilmslow properties
Render is a finish that shows its condition from the pavement. Green and grey discolouration usually appears first on the elevations that stay damp longest, so the north and shaded sides of a house often look markedly different to the rest of it. Cleaning evens that out; it does not change why one elevation holds moisture more than another.
The rendered elevations we clean include modern systems such as K-Rend, monocouche and silicone render, as well as older painted and sand-cement render. All of them are treated with a soft-wash approach at low pressure, because high pressure on render can open the surface, drive water behind it and leave permanent banding.
Planning matters more on render than on ground-level work. Where a property is set back from the road, gated, or on a plot with planting and gravel close to the walls, we agree access, parking and water supply before the day. Planting, gravel and adjacent surfaces are protected during setup, and multi-storey elevations are reached with the right equipment rather than being worked at an angle from the ground.
Where roof or gutter work is genuinely needed on the same property, it is sensible to plan it into the same visit so the elevations are not re-soiled afterwards. We will only suggest that where it applies — we do not add work to a quotation for the sake of it.
On outcome: cleaning improves appearance. It is not a repair. Cracked, hollow or failed render, and staining that has been drawn into the surface, will still be visible afterwards, and we will say so in the quotation rather than after the visit. How long a clean elevation stays clean depends on conditions around the property such as shade, moisture, drainage and nearby vegetation, so there is no fixed interval before growth returns.
Surfaces we clean in Wilmslow
- Modern render systems including K-Rend, monocouche and silicone render
- Older painted and sand-cement render
- Full multi-storey elevations, including gables and set-back frontages
- Soffits, fascias and rendered porches cleaned alongside the main elevations
For the full method, surface notes and common questions, see our render cleaning page or read about roof cleaning & moss removal. Send us photos and your location, or request a quotation.
What render cleaning involves
Render cleaning removes the green algae, black streaking and general weathering that builds up on silicone, acrylic, monocouche and traditional render, restoring the colour of the finish across the whole elevation.
Render is cleaned by soft washing, not pressure washing. Pressure drives water into the substrate and can erode or blow the finish, so treatment and low-pressure rinsing do the work instead.
Render cleaning in Wilmslow, Cheshire
Rendered elevations across Cheshire pick up algae fastest on the north and west faces where they stay damp. We treat the whole elevation rather than the worst patch so the finish is even, work from ground level with long-reach equipment where access allows, and protect windows, frames and planting throughout. Where staining is coming from a blocked gutter or a failed seal, we will say so — cleaning the same streak every year is not a service, it is a symptom. We are fully insured, we work tidily around occupied homes, and every Wilmslow job is photographed before and after so you can see exactly what you paid for.
What's included
- Low-pressure soft-wash treatment
- Suitable for modern and traditional render after assessment
- Green and red algae treated at the root
- Windows and frames rinsed down after
Render results
Render before and after — Wilmslow
Every set below is a rendered elevation cleaned by low-pressure soft washing. Render and walls only — roof moss removal is a separate service. Drag each slider to compare.
The process
How render cleaning runs in Wilmslow
- 01
Assessment
We identify the render system and assess pre-clean warning signs first: cracks, loose render, flaking paint, hollow areas and old repairs. We look at bell-cast and coping detail and check the condition of sealant around openings.
- 02
Protection
Glazing, frames, vents, lighting, paths and planting are protected, and downpipes and gullies are checked.
- 03
Treatment application
A suitable treatment is applied to the elevation at low pressure and allowed to dwell on the growth.
- 04
Controlled cleaning
The render is worked section by section at low pressure, keeping the finish even and avoiding open joints.
- 05
Rinse and clean-up
The elevation and everything below it are rinsed down, and the working area is cleared.
- 06
Inspection and aftercare
We walk the elevation with you, flag any defects we noticed, and explain the continuing effect of the treatment.
Why homeowners in Wilmslow book it
- Removes green and black growth without eroding the render
- Even, streak-free finish across the elevation
- Lifts the appearance of the whole property, not just the ground floor
- Highlights cracks, failed sealant and overflow problems while they are still cheap to fix
Surfaces and properties it suits
- Silicone and acrylic thin-coat render
- Monocouche and through-coloured render
- Traditional sand-and-cement render and pebbledash
- Painted masonry elevations
- Houses, apartment blocks and rendered commercial units
How long it takes
A single elevation is commonly a half-day; a full house is usually around a day. Treated growth keeps fading for a period afterwards, so the final appearance is not the same as the appearance on the day.
- The size of the area and how much of it can be reached with a rotary head rather than by hand
- Access — gates, steps, levels, parking for the van and the distance to water and power
- Condition: heavy moss, lichen or long-standing staining needs more passes or a longer dwell time
- Dwell time where a pre-treatment is used, which cannot be rushed without losing effectiveness
- Weather on the day, and how quickly the surface dries before any sealing or re-sanding
Important considerations before booking
- Treated growth keeps fading after the visit, so the final appearance is not the appearance on the day
- The right method depends on the material, so the surface is assessed before any equipment is set up
- Access, water and power availability affect both the method and the time on site
- Weather affects treatments and drying, so some work is better scheduled than forced
- Cleaning improves appearance and hygiene; it does not repair defects that are already there
What tends to happen if it is left
- Staining spreads across an elevation, and heavier growth may need repeat treatments
- Organic growth spreads and roots deeper, so a later clean takes longer and costs more
- Surfaces stay wetter for longer, which tends to make them slippery underfoot
- Small defects stay hidden under soiling instead of being spotted early
Free, no-obligation quote
Get a price for render cleaning in Wilmslow
Tell us the surface, rough size and access. We normally respond within one working day with a price and the method we would use. Where a job needs a closer look, we say so rather than guess.
Your details are used only to prepare your quote — see our Privacy Policy.
What we look out for in Wilmslow
- Multi-service visits planned and priced as one job
- Render, roof and driveway completed in a single mobilisation
- Protective sealing offered once surfaces are fully dry
Risks, existing damage and limitations
Cleaning does not create most of the problems it uncovers, but it does make them visible. These are the things we check for before we start.
- Cracked or blown render
- Where render has debonded or cracked, water can get behind it. That is a repair matter, and cleaning may make it more visible.
- Fragile or thin coatings
- Aged, chalky or previously over-cleaned render can be fragile and is treated with particular care or left alone.
- Failed sealant around openings
- Perished mastic at windows, doors and abutments is noted and worked around.
- Efflorescence and salt bloom
- Salts moving through masonry can reappear after cleaning and are not a cleaning fault.
- Non-organic staining
- Rust runs, metallic staining and bitumen are unlikely to respond to a soft-wash treatment.
How we reduce the risk
- A walk-round inspection before anything is switched on, so existing defects are noted and shown to you
- Method, pressure and nozzle selected for the substrate rather than a single setting used everywhere
- A small test area in a discreet spot where the surface is unusual, delicate or of unknown age
- Adjacent surfaces, planting, air bricks, vents and paintwork protected or avoided as appropriate
- Anything we find part-way through — a loose slab, a failed joint, a cracked tile — raised with you before we continue
What a good result looks like
An even, noticeably brighter elevation with organic growth removed and the render's own colour visible again. Where the finish has faded or is chalking, cleaning improves it but does not replace decoration.
What cleaning cannot put right
- Cracked, hollow or debonded render
- Colour loss and chalking in an aged finish
- Damp and detailing faults behind the render
- Permanent iron, rust or bitumen staining
Keeping the result
- Fix overflowing gutters and leaking downpipes, which cause most recurring streaks
- Trim planting back from the wall so elevations dry after rain
- Clear leaf litter and standing debris through autumn — organic matter is what feeds regrowth
- Book a lighter maintenance visit before growth re-establishes rather than waiting for it to look bad again
Why us
Why Refresh Revive?
White Glove Standard™
The same documented standard of workmanship and finish on every single visit.
Surface-Specific Cleaning Methods
Soft washing, pure water or controlled pressure — matched to the material, never guessed.
Before & After Photography
Every job recorded so you can see exactly what changed, including work at height.
Professional Equipment & Safe Chemistry
Commercial-grade equipment and correctly dosed products, applied by trained operatives.
Honest Advice with No Pressure Selling
If a treatment isn't right for your property, we tell you — and explain why.
10 Years of Industry Experience
A decade of hands-on industry experience brought to every assessment and clean.
Questions
Render cleaning in Wilmslow — common questions
Will cleaning damage K-Rend?
Not with a soft wash. K-Rend and other silicone renders must never be pressure washed — the coating is thin and blasting it leaves permanent marks. We use low pressure and an appropriate soft-wash treatment only.
Why does my render keep going green?
Damp, shade and airborne spores. Elevations in Wilmslow that face north or sit under trees stay wet for longer, so they colonise first. A soft wash plus an occasional maintenance treatment keeps it in check.
Can you clean render on a two-storey house?
Yes — most two-storey elevations are treated from the ground with long-reach equipment, so there is no scaffold cost.
Questions & answers
Everything people ask us
Often booked with this in Wilmslow
Soft washing
Low-pressure soft washing for rendered and painted elevations — algae, lichen and black streaking treated at the root. For render and walls, not roofs; roof moss removal is a separate service.
on quote
Gutter, fascia & soffit cleaning
UPVC gutter faces, fascias and soffits washed down using pure water and soft brush heads.
on quote
Roof cleaning & moss removal
Moss removed from tiles and slate by hand, then soft washed with an appropriate treatment or soft-wash treatment. No high pressure is used on your roof covering.
from £450
All other services in Wilmslow
Render cleaning nearby
Free, no-obligation quote
Get a price for render cleaning in Wilmslow
Tell us the surface, rough size and access. We normally respond within one working day with a price and the method we would use. Where a job needs a closer look, we say so rather than guess.
Your details are used only to prepare your quote — see our Privacy Policy.