Fully Insured
£5 million insurance cover, with documentation supplied on request.
Pure water window cleaning for homes and businesses
Exterior glass, frames, sills and doors cleaned with purified water through a reach-and-wash pole system — including upper-storey windows, reached from ground level.
The problem
Why purified water, and why frames matter
Ordinary tap water carries dissolved minerals. When it dries on glass those minerals stay behind as spotting, which is why a rushed wash-and-rinse can look worse once the sun comes out. Purified water has that mineral content removed, so it lifts soiling and then dries clear.
The frames are half the job. Dirt held in frames, sills and door surrounds runs straight back down onto clean glass in the first shower, so they are brushed down before the glass rather than left alone.
Working from the ground changes the practicalities too. A reach-and-wash pole gets to upper-storey and awkward windows without ladders resting against gutters, sills or conservatory roofs.
What the service involves
Pure water window cleaning covers the exterior glass, frames, sills and doors, cleaned with purified water through a reach-and-wash pole system rather than detergents and squeegees.
Purified water carries no minerals, so it lifts soiling and then dries clear without leaving the spotting a mains-water clean leaves behind. Upper-storey and awkward windows are reached from ground level rather than by resting ladders against the property.
Our method
How we approach pure water window cleaning
- 01
Assessment
We look at the number and type of windows, the reach required and anything that needs care, such as aged frames or open vents.
- 02
Set-up
The pole system is set up from ground level and the working area below each elevation is kept clear.
- 03
Frames and sills first
Frames, sills and door surrounds are brushed down so soiling from them is not carried back onto clean glass.
- 04
Glass cleaning
Glass is brushed and rinsed with purified water, working methodically across each elevation.
- 05
Final rinse
Each pane is given a final rinse and left to dry naturally clear rather than being buffed dry.
- 06
Check and report
We review the elevations with you and report anything we noticed, such as failed seals or damaged frames.
What's included
Every pure water window cleaning visit
- Purified-water cleaning designed to dry clear and streak-free
- Exterior glass, frames, sills and doors cleaned as standard
- Safe access to upper-storey and awkward windows from ground level
- One-off deep cleans and regular scheduled visits for homes and businesses
- Glass, frames and sills cleaned together rather than glass alone
- Upper-storey and awkward windows reached safely from ground level
- No harsh detergents used on the glass or running into planting below
- Available as a one-off deep clean or as regular scheduled visits
What affects your quotation
Why we price each property individually
- The number of windows and doors, and how many storeys are involved
- Frame type and condition, since aged UPVC and painted timber are cleaned more gently
- Access to each elevation, including gated side returns, conservatories and planting beneath windows
- Whether you want a one-off deep clean or regular scheduled visits
- Whether conservatory, roofline or render cleaning is wanted at the same visit
Every quotation is prepared for the property in front of us. Tell us the surface, rough size and access and we will confirm the method and the price.
Surface care
What is and is not included
- Exterior glass, frames, sills and doors are cleaned as standard; interior glass is not part of this service.
- Glass is left to dry naturally rather than buffed, which is how a purified-water clean is meant to finish.
- Misting between the panes of a double-glazed unit is a failed seal inside the unit and cannot be cleaned out.
- Existing scratches, pitting and etched hard-water marks become more visible once soiling is removed.
- Paint overspray, render splashes and builders' residue are separate work, not general window cleaning.
How we reduce the risk
- A walk-round inspection before anything is switched on, so existing defects are noted and shown to you
- Method, pressure and nozzle selected for the substrate rather than a single setting used everywhere
- A small test area in a discreet spot where the surface is unusual, delicate or of unknown age
- Adjacent surfaces, planting, air bricks, vents and paintwork protected or avoided as appropriate
- Anything we find part-way through — a loose slab, a failed joint, a cracked tile — raised with you before we continue
Being straight with you
What cleaning cannot put right
- Misted or blown double-glazed units
- Scratched, pitted or etched glass
- Rotten timber or oxidised UPVC frames
- Interior glass, which is not part of this service
Keeping the result
- Keep sills and frames clear of standing debris, which washes back onto the glass in heavy rain
- Clear leaf litter and standing debris through autumn — organic matter is what feeds regrowth
- Book a lighter maintenance visit before growth re-establishes rather than waiting for it to look bad again
Where a surface would genuinely benefit from protection once it is clean and dry, ask about exterior surface sealing.
Before we start
How we plan the job on the day
The right method for the surface, not simply more pressure. Before anything is switched on we look at what we are actually cleaning: the material, the contamination on it, the condition it is already in, and whether there is cracking or earlier repair work that needs treating carefully.
We also check the practical side. An outside tap is preferred so we do not have to run hoses through your home; where an indoor tap is needed, we agree a safe hose route, take the hose out carefully and keep the connection monitored and secure. The water flow affects how quickly our equipment or water tank refills. Access, nearby walls and render, planting and delicate areas are all noted so they can be protected or worked around.
If there is no outside tap, it helps to mention it when you enquire. It is easily worked around, but it is better known in advance than found on the morning.
Photographs and existing damage
A clear record of how we found it
We often photograph the area before we begin — damaged seals, loose trims and existing scratching. It gives an honest record of the property's condition, and it gives you a genuine before-and-after comparison once the work is finished.
If we find a defect, we would rather point it out than quietly clean over it. We will show you what we have found, adjust the method around the weaker area where that is sensible, and if continuing could do more harm than good we will stop and talk it through. Sometimes the right advice is to have another suitable tradesperson look at it first.
We would rather work carefully around a problem than knowingly make it worse.
What to expect
Realistic results from the surface you have
Cleaning can make a very large difference, but it cannot undo age. Weathering, worn surfaces, permanent staining, previous repairs and colour variation may still be visible afterwards. What we aim for is the best sensible improvement from the existing surface, and we will say so before we start if we think the result will be limited.
Frames, fascias and soffits are usually the next thing customers notice once the glass is clear. See gutter, fascia and soffit cleaning.
Why us
Why Refresh Revive?
White Glove Standard™
The same documented standard of workmanship and finish on every single visit.
Surface-Specific Cleaning Methods
Soft washing, pure water or controlled pressure — matched to the material, never guessed.
Before & After Photography
Every job recorded so you can see exactly what changed, including work at height.
Professional Equipment & Safe Chemistry
Commercial-grade equipment and correctly dosed products, applied by trained operatives.
Honest Advice with No Pressure Selling
If a treatment isn't right for your property, we tell you — and explain why.
10 Years of Industry Experience
A decade of hands-on industry experience brought to every assessment and clean.
Where we work
Pure Water Window Cleaning from our Bolton, Greater Manchester base
We cover Cheshire, Lancashire, Greater Manchester and the wider North West for homes and commercial premises of every type, with much of our multi-service work in the premium Cheshire and south Manchester areas below. Check the towns we cover or ask if you are just outside them.
Related work
Often booked at the same visit
Driveway cleaning
Block paving, Indian sandstone, porcelain, concrete and tarmac restored with rotary surface cleaning and hand-lanced detail.
Read more →Patio cleaning
Patios brought back to their original colour, with jointing and planting protected throughout the clean.
Read more →Roof cleaning & moss removal
Moss removed from tiles and slate by hand, then soft washed with an appropriate treatment or soft-wash treatment. No high pressure is used on your roof covering.
Read more →Render cleaning
Soft washing for K-Rend, silicone render, painted render and pebbledash — the method is chosen after we assess the finish, so the coating is not worked mechanically.
Read more →Soft washing
Low-pressure soft washing for rendered and painted elevations — algae, lichen and black streaking treated at the root. For render and walls, not roofs; roof moss removal is a separate service.
Read more →Gutter clearing
Gutters and downpipes cleared by high-reach vacuum, with camera evidence of every run before and after.
Read more →Gutter, fascia & soffit cleaning
UPVC gutter faces, fascias and soffits washed down using pure water and soft brush heads.
Read more →Stone & paving cleaning
Natural stone, flagging, York stone, limestone and porcelain cleaned with the care each material needs.
Read more →Conservatory cleaning
Conservatory roofs, frames, finials and box gutters cleaned so the light comes back into the room.
Read more →Decking cleaning
Timber and composite decking cleaned at the right pressure to lift algae without furring the grain.
Read more →Wall & brick cleaning
Brickwork, stone walls and boundary walls cleaned of algae, staining and atmospheric grime.
Read more →Pressure washing
Controlled high-pressure cleaning for hard surfaces that can take it — paths, steps, yards, forecourts and walls.
Read more →Swimming Pool Surround Cleaning
Pool surrounds, coping and surrounding paving cleaned and de-slimed. This service covers the surround only — not pool water, liners, filtration or internal pool systems.
Read more →Quotation journey
How quotations work
- 01
Choose how to enquire
Use the Get a Free Quote journey or the Send Photos on WhatsApp option.
- 02
Share useful details
Describe the surface, condition, access and the work required. Photos can help show the area.
- 03
Confirm the scope
The suitable approach and your quotation are based on the information available and the work required.
The final quotation can depend on size, surface, condition, access, treatment required, complexity and additional services.
Next step
Get a free quote for pure water window cleaning
Send us a few clear photographs, your location, the surface or area you want cleaned and a short description of the problem. We normally respond within one working day with the method we would use and the price. Where a job needs a closer look, we say so rather than guess.
Prefer email? Send your photographs and details to info@refreshrevivecleaning.co.uk or call 07549 064190.